K-edge K13-490 Manuale Utente Scaricare il pdf

GARMIN® Mount Installation Instructions

(K13-490)

Description:

The K-Edge GARMIN® Mount is designed for installation of a GARMIN EDGE® computer onto a 31.8mm handlebar.

Compatibility:

The K13-490 GARMIN® Mount is compatible with all GARMIN EDGE® computers utilizing the same mounting system.

Warnings:

These instructions are generalized to accommodate a wide ranges of setups for a bike. If your setup does not match what is being

described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.

Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could

also cause personal injury to the rider.

Parts Included:

 K13-490

 1x K-Edge Handlebar Clamp

 1x K-Edge GARMIN® mount arm

 2x M4 x 12 mm bolts

 1x M4 x 8 mm (Blue Thread Lock applied)

Tools/Items Required:

 Metric Allen Set (3 mm for clamp bolt and 2.5 mm for mounting arm)

 Torque wrench

1 2 3 4

1 GARMIN® Mount Installation Instructions (K13-490) Description: The K-Edge GARMIN® Mount is designed for installation of a GARMIN EDGE® compu

2 Installation Steps: 1. Separate the upper clamp half (K13-421) from the lower clamp half (K13-423) by removing the 2x M4 x 12 bolts. 2. Insta

3 7. Install the mounting arm (K13-491) in the correct position shown below: 8. Install, but do not tighten, the M4 x 8mm Button Head bolt in

4 Troubleshooting: • My computer hits the front stem cap when I install/remove it from the mount. o Adjust the mounting arm (K13-491) to avoid con

Nessun commento

K-edge K13-490 Manuale Utente